-28% Easy Splicer Kit

my info EN

About Easy Splicer Kit

  • Fusion splicing made easy and affordable with the EasySplicer.
  • For both Singlemode and Multimode fibres.
  • Splicing time of less then 7 seconds.
  • Loss estimation.
  • Pull test of performed splices.
  • Built in oven.
  • Easy to use and to carry along.
  • Perfect for the FTTH installer.

The EasySplicer is a swedish made Fusion Splicer, designed for working daily with fiber optic installations.

It´s small and handy to bring along to any kind of work. The construction is made very rugged and even if splicing should take place under good conditions (indoors) it is still designed to be  used out in the field.

The design of the EasySplicer differs a bit from other Fusion Splicers as it is made with focus on the installer/user. Many of the Splicers on the market are, even if very competent, difficult to use and require a lot education before they can be operated.

The EasySplicer is very easy to learn how to use. It doesn´t take more than an hour for anyone to learn how to use the Splicer and start working with it.

The EasySplicer operates with three buttons only and mostly the user only have to use the main button to perform the splicing.

Still, the precision of the unit is extremely high. It makes typical splicing with a loss of 0,03 dB (Singlemode). After splicing it pull teststhe splice and makes a loss estimation of the splice were it also tells if something is wrong. Such information is also provided before splicing (like; Bad fiber and Dirty fiber ).

Fusion Splicer features
Applicable fibers SM, MM
Cladding diameter 125 μm
Splice mode 2 pre-defined, 6 user-editable programs
Typical splice loss 0.03dB (SM), 0.01dB(MM)
Splice Time 7sec
Tube heating time 50sec
Viewing methods / display LCD, color, 2.8 , 320x240 pixels
Magnification Camera 140x
Applicable protection sleeve Max 64mm length
Battery life 40 splicing cycles with oven.
Electrode life 2200
Size / weight 230x98x53mm / 900g
Terminals / ports USB
Other features Loss estimation, Fiber fault detection, SD-card for logging

Write a review

Note: HTML is not translated!
    Bad           Good

Name EasySplicer
Splicing method  V-grove (cladding alignment).
Fiber Types  SMF, MMF 50/125μm and 62.5/125μm fiber, 250μm primary and 900μm secondary coated fiber.
Fiber Handling  Fiber holders, 2 pairs (250 and 900)
Splice Programs  2 pre-defined. SMF & MMF
Typical Splice Loss  0.03dB SMF, 0.01dB MMF
Typical Cycle Time  7s + 35s (splice cycle + oven cycle)
Sleeve Dimensions  Max 64mm length, 2-5mm diameter supported by oven
Communication  USB, mini usb plug.
Memory Internal 1MB, External SD-Card.
Monitor LCD, color, 2.8 , 320x240 pixels
Magnification Camera  140x
Operating Environment  0-40°C, max 95% RH, non-condensing
Size  230x98x53mm
Weight  800g
Power Sources  External power supply, 6V, 1.5A, 100-240VAC 50-60Hz, Built in Li-Ion battery pack
Splicing Capacity  60 splicing cycles.
Additional Features  Loss estimation, Fiber fault detection, SD-card for logging etc.

Easy Splicer Kit

Free Shipping

Free shipping on orders over 300 EURO

  • Product Code: EasySplicer
  • Availability: In Stock
  • 8,794 lei
  • 6,307 lei
  • Ex Tax: 5,300 lei

Tags: Fusion Splicer, EasySplicer, EZ Splicer